Home » Videos

Video: Brenspeed dyno tests the Edelbrock supercharger for the 2011+ Mustang GT

By - September 13, 2011 – 2:45 pmNo Comment | 421 views

Brenspeed Mustang with Edelbrock Supercharger

Brenspeed, a Mustang performance shop based out of Indiana, recently got their hands on one of Edelbrock’s E-Force supercharger systems for the 2011+ Mustang 5.0 and have been doing some testing on their in-house dyno.

They first made a base run without the supercharger system, netting 355 rwhp and 357 rwtq. Then, after installing the Edelbrock supercharger set to 5 psi, they put the Mustang on the rollers once again with the car putting out an impressive 463 rwhp and 419 rwtq. Brenspeed followed that up by installing their own calibration into the PCM, adding another 29 horsepower and 11 lb-ft torque at the rear wheels. Finally, they installed Edelbrock’s competition cold air intake for a grand total of 509 rwhp and 441 rwtq.

You can watch a video of the dyno runs below, or head over to Brenspeed’s web site to check out their selection of performance parts.




coded by nessus

Leave a comment!

Add your comment below, or trackback from your own site. You can also subscribe to these comments via RSS.

Be nice. Keep it clean. Stay on topic. No spam.

You can use these tags:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

This is a Gravatar-enabled weblog. To get your own globally-recognized-avatar, please register at Gravatar.