Ford officially announces 1964 1/2 to 1966 Mustang Convertible licensed body shells
It’s a classic car lover’s dream come true: Now it is possible to build a ’64½, ’65 or ’66 Mustang convertible from the wheels up using the all-new Ford-approved and officially licensed body shell.
The body shell for the original Mustang convertible, now in production and available for restorers as a Ford-licensed restoration part, gives classic car enthusiasts a new option in putting their classic dream Mustang ragtop back on the road.
“The 1964-66 Mustang is the most restored vintage vehicle. But the number of original 1964-66 vintage bodies is shrinking every year,” said Dennis Mondrach, Ford Restoration Parts licensing manager. “Most of the original Mustangs left in scrapyards are rusted or wrecked beyond repair. The new body shell is made of virgin metal and uses modern welding techniques. It comes rustproofed, and after final adjustment and finish preparation of the body panels, it is ready for painting and final assembly.”
To build a restored Mustang using the new shell, the powertrain, suspension and brakes, the electrical systems, the interior and trim can either be bought new or transferred from an existing car to the new body. Original parts that can’t be reused from an old Mustang can be replaced with Ford-approved restoration parts. Mondrach says that nearly all the parts needed to build a complete new 1964-66 Mustang convertible, except for some minor body hardware, are now available from Ford-approved classic parts suppliers.
Ford-approved Mustang restoration parts can be found at www.fordrestorationparts.com.
For a restoration part to be approved by Ford, suppliers must meet or exceed the fit, finish and quality of the original, said Mondrach. In order to keep classic Ford-built vehicles on the road, Ford allows parts suppliers access to original technical drawings, blueprints and specifications for parts.
The new body shell can not only save restorers time and money, but enable them to build a strong, well-engineered classic.
“Instead of spending money fixing rust and welding in new panels, restorers can now simply transfer their powertrain, interior and trim parts onto the new body shell,” said Mondrach.
The ’65 Mustang body shell is constructed of higher-grade steel than the original, said Jim Christina, vice president of Dynacorn International, the Ford-approved company that is manufacturing the ’65 Mustang. “We use a modern universal automotive-grade steel that is actually stronger than the original, and modern welding techniques along with more welds to strengthen the body,” Christina said.
The ’65 body is in production now and can be delivered by freight truck to any address. The ’65 Mustang body includes the doors and trunk lid and all the sheet metal from the radiator support to the taillight panel except the hood and front fenders. Those items are available separately. The ’65 Mustang body shell starts at $15,000.
America’s love affair with the original Mustang is still going strong after nearly 50 years. Debuting in April 1964, the original Mustang sold more than 1.2 million units – including more than 174,000 convertibles – before its first redesign in 1967. The 1964-66 Mustang has long been America’s most popular classic car of the postwar era. It is frequently the No. 1 most insured car at Hagerty Insurance, the world’s No. 1 insurer of classic and collectible cars.
The new body shell can be made into a 1964½, 1965 or 1966 Mustang, based on the powertrains and trim parts added to it. It is the third classic Mustang body shell now available to restorers. The other two are the 1967-68 and the 1969-70 fastback bodies.
Ford will display a new 1965 Mustang body shell Nov. 1-3 at the Specialty Equipment Marketing Association (SEMA) show in Las Vegas. It will be parked next to a restored 1965 convertible to demonstrate the high quality of the assembly.
- Dynacorn to show off officially licensed 1965-1966 Mustang body shell at SEMA
- Video: Agent 47 Harbinger takes to the track
- SEMA 2011: Dynacorn 1964 1/2 to 1966 Mustang Convertible body shell in detail
- Ford announces new licensed reproduction 1967 Mustang Convertible body shell
- SEMA 2010: Dynacorn previews its 1965-1966 Mustang body shell
- SEMA 2013: K&N debuts Blackhawk Induction Intake for the 2011-2014 Mustang GT
- Ford Mustang named hottest car of 2013 SEMA Show
- SEMA 2011: Filip Trojanek's 1966 Widebody Mustang Race Car
- SEMA Preview: Galpin Widebody Mustang Boss 302-X completed and ready for its debut
- SEMA 2013: Vortech Superchargers Yellow Jacket Mustang