Home » News

Roush Phase 3 Supercharger System officially rated at 675 horsepower

By - March 4, 2013 – 9:08 amNo Comment | 1,496 views

Roush Phase 3 Supercharger System

Roush first announced their Phase 3 supercharger system back in November at the SEMA Show in Las Vegas, but at the time the specifics about the kit were scarce. Now the company has finally released a full list of details including the final horsepower and torque numbers: 675 and 585. That’s right, the Roush Phase 3 supercharger boosts the Coyote 5.0L V8 by 255 horsepower and and 195 lb-ft torque. Both complete and upgrade kits are offered, meaning owners of a Roush Phase 1 or 2 system only need to purchase the necessary parts to reach the Phase 3 level.

So how does Roush manage to squeeze so much horsepower out of the Mustang’s 5.0L V8? The basis for the system remains the same – the tried and trusted 2.3L TVS blower, but it’s matched with an 80mm pulley, high-flow fuel rails with 47 lb/hr injectors, a high efficiency intercooler and larger radiator, a cold air intake system, a fuel pump voltage regulator and a unique Roush PCM calibration.

Retail pricing for the full Phase 3 supercharger system is listed at $7,199.99 while the Phase 3 upgrade kit is listed at $1,099.99 to $1,499.99 depending on which version is currently installed.

Roush Phase 3 Supercharger Kit:

  • ROUSH R2300 2.3L TVS Supercharger
  • 80mm Supercharger Pulley
  • ROUSH Fuel Pump Voltage Regulator with Plug-n-Play wiring harness
  • Upper and lower aluminum intake manifolds
  • Twin 60mm throttle body and matching throttle body spacer
  • Cold air induction system
  • High flow fuel rail with 47lb injectors
  • High efficiency intercooler system
  • Large full face low temperature radiator
  • All required fasteners, wiring, brackets, hoses and clamp

Roush Phase 3 Supercharger Upgrade Kit:

  • 80mm Supercharger Pulley
  • ROUSH Fuel Pump Voltage Regulator with ROUSH Plug-n-Play wiring harness
  • Cold air induction system (Phase 1 Upgrade only)
  • 2085mm 6-rib serpentine belt (Phase 1 Upgrade only)
  • Unique ROUSH PCM Calibration

[Source: Roush]

coded by nessus

Leave a comment!

Add your comment below, or trackback from your own site. You can also subscribe to these comments via RSS.

Be nice. Keep it clean. Stay on topic. No spam.

You can use these tags:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

This is a Gravatar-enabled weblog. To get your own globally-recognized-avatar, please register at Gravatar.