Detroit Speed, based in Mooresville, NC, has announced the release of their new QUADRALink rear suspension system for the 1964 1/2 to 1970 Ford Mustang. Using the company’s patended “Swivel-Link” design, the suspension system is available to fully articulate with smooth and solid motion with no binding and without using heim joints that can be prone to excess noise and durability problems. The QUADRALink suspension system also utilizes long upper links that provide great pinion and u-joint angle control, an adjustable panhard rod that provides precise and effective …

Giving project car owners even more powerplant options, Ford Racing Performance Parts have announced a new selection of short blocks in three different variations. Available in 347, 363 and 427 cubic inch displacements, the short blocks all feature a SCAT forged steel crankshaft, forged I-beam connecting rods and forged Mahle pistons. The 347 and 363 short blocks fit many vehicles originally built with 289 or 302 blocks with 8.2-inch deck height, while the 427 short block’s deck height of 9.5 inches will fit in just about any Ford vehicle.
These same …

Jim Inglese, a name who is legendary for building Weber carburetion systems, has announced that his company will be offering Independent Runner Weber and EFI induction units for the Coyote 5.0-liter engine. Each eight-stack system is custom-built and calibrated for each engine, with a wide variety of plating and other finishes available.
Currently the FAST software used with the intake runners doesn’t allow for variable valve timing, but Inglese tells us that power output remains relatively the same as stock with more to be had. “There is still a lot …

If you’ve been thinking that the 2013 Shelby GT500′s 5.8-liter V8 would make for a good engine in your project car, then there’s good news. Ford Racing Performance Parts has announced that the 5.8L aluminum block that comes standard in the Shelby is now available for individual purchase through their catalog. Part number M-6010-M58A, the block offers a 100 pound weight savings compared to the iron 5.4L unit, and provides more durability thanks to the Ford GT aluminum block thanks to its unique liner coating. While Ford Racing does leave …

Shelby Performance Parts has introduced a new group of equipment to help enthusiasts gear up for the track as the spring season begins. The new parts add serious performance and safety to the 2005-2012 Ford Mustang and Shelby GT, 2007-2012 Shelby GT500 and the 2012-2013 Boss 302 vehicles. The fresh lineup features a Stainless Steel Cat-back and X-pipe exhaust system, Harness Bar engineered for track safety, 14” Front Rotors, and a Shelby Racing Jacket and Racing Helmet.
“With road courses across the country reopening after winter, now is the perfect time …

ARP has announced two new Pro Series head stud kits for the 2011+ Mustang 5.0L Coyote V8. Each kit includes the necessary studs, premium grade 8740 chrome moly nuts and washers for the application and a 1/2 oz. pack of ARP Ultra-Torque fastener assembly lubricant as well as premium grade ARP2000 material that is rated at 220,000 psi tensile strength.. ARP fasteners are centerless ground, heat treated prior to thread rolling and machining and designed to exceed the OEM fasteners in strength and durability.Optimum design, enhanced reliability and increased strength …

Kenny Brown is helping keep things cool with their Front Brake Cooling Kits for owners of the 1994-2014 Mustang, SVT Cobra, Boss 302 and Shelby GT500. The new brake cooling kit is a quick and easy upgrade for performance street, open-track and racing applications. Kenny Brown has engineered an easy to install cooling duct that specifically directs the inlet where air can flow through the rotor veins rather than pushing air onto the swept portion of the rotor. This concept is much more efficient in cooling the disk, …

Owners of the new Shelby GT500 looking to swap out their stock exhaust system have quite a few options, the latest being from Ford Racing Performance Parts. FRPP has announced a new upgraded exhaust system with sport mufflers for the 2013+ Shelby GT500, part number M-5230-MSVTLB. Featuring the same quad-tip design as the stock mufflers, the system is constructed of T304 stainless steel and mandrel-bent tubing and provides a louder, throatier note than the factory units. The polished tips are also embossed with the Ford Racing logo. Unfortunately for California …

Not long after the Mustang Boss 302 went on sale the car’s high-flow intake manifold found its way into the Ford Racing Performance Parts catalog, making for a popular upgrade for 2011+ Mustang owners that used a centrifugal supercharger or who wanted to stay naturally aspirated. Now Ford Racing is providing yet another option in the form of the Cobra Jet intake manifold. Part #M-9424-M50CJ, the unit is the same one used on the naturally aspirated 2013 Mustang Cobra Jet and provides an even greater horsepower increase than the Boss …

Ford Racing Performance Parts has announced a new short-throw shifter for the 2011-2014 Ford Mustang V6 and GT with the 6-speed manual transmission. The shifter looks to be made by Barton Industries – they offer their own version of the shifter for the Mustang – which isn’t a bad thing since their unit is well designed and made from quality materials. Part number M-7210-MGTB, the shifter features 6061 T6 billet aluminum and 304 stainless steel construction as well as a blue anodized finish for corrosion resistance, a strong polyurethane bushing …